Hello !
Trace: • A human operator (remote control and mission planning) • Specific Elements of AVR Architecture • IoT Security Technologies • Interrupt Controller, Interrupts • Fundamentals of Addressing Modes • Drone Simulators • Memory, Types and Their Functions

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
en:iot-open:power_efficiency_in_iot:iot_software_platform [2018/07/10 12:09] – Agrisniken:iot-open:power_efficiency_in_iot:iot_software_platform [2020/07/20 12:00] (current) – external edit 127.0.0.1
Line 1: Line 1:
-==== IoT software platform ====+====  ====  
 +<box #d04a25></box> 
 +<box #d04a25></box> 
 +==== IoT Software Platform ==== 
 +<box #d04a25></box> 
 +<box #d04a25></box>
  
 The IoT hardware requires operating systems and communication protocols to interact with a user and other devices.  The IoT hardware requires operating systems and communication protocols to interact with a user and other devices. 
Line 14: Line 19:
  
 In a SoA for an IoT middleware, the software between objects (things which are equipped with sensors) and applications should provide object abstraction,  In a SoA for an IoT middleware, the software between objects (things which are equipped with sensors) and applications should provide object abstraction, 
-service managements and service composition through a secure network. +service management and service composition through a secure network. 
  
 Each IoT software main task is device identification in the network. For object identification, different addressing methods are used based on internet protocols (IPs) such as  Each IoT software main task is device identification in the network. For object identification, different addressing methods are used based on internet protocols (IPs) such as 
 IPv4, IPv6, and 6LoWPAN. For the identification, it should be notified that an object’s identification and address are different. While an object can be identified locally, for example inside a 6LoWPAN network, the object within the global network uses public IPs as the address.  IPv4, IPv6, and 6LoWPAN. For the identification, it should be notified that an object’s identification and address are different. While an object can be identified locally, for example inside a 6LoWPAN network, the object within the global network uses public IPs as the address. 
-Identification methods aim to make a clear identity for any object inside the network. Communication link technologies should provide the infrastructure for the connection  +Identification methods aim to make a clear identity for an object inside the network. Communication link technologies should provide the infrastructure for the connection of smart devices (sensor nodes). The IoT sensor nodes should work normally under severe designs specifications including low-power consumption, and operation in the noisy environment.  
-of smart devices (sensor nodes). The IoT sensor nodes should work normally under severe designs specifications including low-power consumption, and operation in the noisy environment.  +Currently, there are different communication protocols which can be used for IoT applications, which have been covered in chapter "5. Introduction to the IoT Communication and Networking".
-Currently, there are different communication protocols which can be used for IoT applications, which have been covered in [[en:iot-open:communications_and_communicating_sut]]+
  
  
en/iot-open/power_efficiency_in_iot/iot_software_platform.1531213769.txt.gz · Last modified: (external edit)
CC Attribution-Share Alike 4.0 International
www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0