Differences

This shows you the differences between two versions of the page.

Link to this comparison view

--- en:hardware:homelab:sensor:v52 [2012/05/29 18:37] – illo
+++ en:hardware:homelab:sensor:v52 [2020/07/20 12:00] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Sensor module v5.2 ======
+<pagebreak>
-(Version 5.2)
+====== Sensor module ======
-Sensor module includes the combined board of sensors, low-pass filter and external sensors.
+Sensor module includes Sensor board with on-board sensors, low-pass filter and external sensors.
 Sensor module features
@@ Line 35: / Line 35: @@
 ==== Low-pass filter ====
-Low-pass filter can be composed between external analogous inputs 0-3 (PF0-PF3). Resistor and capacitor will be connected to the socket for building up the low-pass filter. By default a low-pass filter is composed for the channel 0 (PF0). Resistor value is 10 kΩ and capacitor value is 100 nF.
+Low-pass filter can be composed between external analogous inputs 0-3 (PF0-PF3). Resistor and capacitor will be connected to the socket for building up the low-pass filter. By default a low-pass filter is not composed only 1 Ohm resistors are included for all channels.
 [{{:examples:sensor:rc_sch_v51.png?580  |Schematics of external sensor connections and low-pass filter}}]
@@ Line 41: / Line 41: @@
 ==== Digital I/O connector ====
-In addition to the sensors and analog inputs, there is a connector for digital I/O on the board. The pins of the connector are directly connected to pins PE2-PE5 of the controller.
+In addition to sensors and analog inputs, there is a connector for digital I/O. Digital I/O pins are directly connected to pins PE2-PE5 of the controller.
-Also digital serial interface connector is in use (74HCT165D), where is convenient to connect similar sensors. Digital serial interface is connected as following: clock input PC7, asynchronous parallel load input (active LOW) PA6, serial output from the last stage PA7.
+Also digital serial interface connector is in use (74HCT165D), which is convenient for connecting similar digital sensors. Digital serial interface is connected as following: clock input - PC7, asynchronous parallel load input (active LOW) - PA6, serial output from the last stage - PA7.
-[{{:examples:sensor:dio_sch_v52.png?580  |The digital input/output  connectors}}]
+[{{:examples:sensor:dio_sch_v52_2.png?580  |The digital input/output connectors}}]

en/hardware/homelab/sensor/v52.1338305878.txt.gz · Last modified: 2020/07/20 12:00 (external edit)