en:hardware:arm-can:programmer
This is an old revision of the document!
Table of Contents
Programmer
Programmer module
Features
Programmer
- FTDI FT2232D USB-JTAG converter.
- Compatible with Stellaris Flash programmer software.
- Can download and debug program.
Power supply
- Powered from USB bus.
- Green power-on LED and red target-connected LED.
Physical
- Dimensions 33 x 31 x 12 mm
- Weight ~8 g
- Optional housing
Connectors
Programmer connectors
ARM-CAN Programmer has two connectors: USB to connect the Programmer to PC and JTAG to connect the Programmer to ARM-CAN Controller. To recognize the connectors the programmer has to be held as shown in the picture.
JTAG
JTAG connector
Programmer board has standard 20-pin JTAG connector with essential pins for programming and debugging. When voltage is detected on VREF pin, a red light on the Programmer board lights up.
USB
Programmer board has USB micro-AB connector to connect it with the PC.
en/hardware/arm-can/programmer.1293710840.txt.gz · Last modified: (external edit)