https://home.roboticlab.eu/ 2026-04-05T05:05:53+00:00 https://home.roboticlab.eu/ https://home.roboticlab.eu/_media/wiki/logo.png text/html 2020-07-20T09:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://home.roboticlab.eu/en/iot/dht?rev=1595235600&do=diff #include <Arduino.h> #include <ittiot.h> #include <DHT.h> #define DHTPIN D4 // what pin we're connected to #define DHTTYPE DHT22 // DHT 22 (AM2302) DHT dht(DHTPIN, DHTTYPE); void iot_connected() { Serial.println("MQTT connected callback"); iot.log("IoT DHT example!"); } void setup() { Serial.begin(115200); Serial.println("Booting"); iot.printConfig(); // print json config to serial //Peale Serial.begin ja enne iot.setup iot.setup(); pinMode(16, OUTPUT); dht.begin(); }… text/html 2020-07-20T09:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://home.roboticlab.eu/en/iot/encoder?rev=1595235600&do=diff #include <Arduino.h> #include <ittiot.h> #include <Ticker.h> #include <Encoder.h> #define ENC_PIN_1 12 #define ENC_PIN_2 13 Encoder myEnc(ENC_PIN_1, ENC_PIN_2); Ticker encTicker; long oldPosition = -999; bool encFlag; void iot_connected() { Serial.println("MQTT connected callback"); iot.log("IoT encoder example!"); } void setEncFlag() { encFlag=true; } void setup() { Serial.begin(115200); Serial.println("Booting"); iot.printConfig(); // print json config to serial //Peale S… text/html 2020-07-20T09:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://home.roboticlab.eu/en/iot/oled?rev=1595235600&do=diff #include <Arduino.h> #include <ittiot.h> #include <Ticker.h> #include <ESP8266WiFi.h> #include <SPI.h> #include <Wire.h> #include <Adafruit_GFX.h> #include <Adafruit_SSD1306.h> #define OLED_RESET 0 // GPIO0 Ticker timeTicker; Adafruit_SSD1306 display(OLED_RESET); // ITT splashs screen bitmap. Generator: http://javl.github.io/image2cpp/ static const unsigned char PROGMEM logo16_glcd_bmp[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x… text/html 2020-07-20T09:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://home.roboticlab.eu/en/iot/relay?rev=1595235600&do=diff #include <Arduino.h> #include <ittiot.h> #define RELAY_PIN 5 // If message received switch relay void iot_received(String topic, String msg) { Serial.print("MSG FROM USER callback, topic: "); Serial.print(topic); Serial.print(" payload: "); Serial.println(msg); if(msg == "1") { digitalWrite(RELAY_PIN, HIGH); } if(msg == "0") { digitalWrite(RELAY_PIN, LOW); } } void iot_connected() { Serial.println("MQTT connected callback"); iot.subscribe("relay"); iot.log("… text/html 2020-07-20T09:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://home.roboticlab.eu/en/iot/rgb?rev=1595235600&do=diff #include <Arduino.h> #include <ittiot.h> #include <Adafruit_NeoPixel.h> #define PIN D2 // When we setup the NeoPixel library, we tell it how many pixels, and which pin to use to send signals. // Note that for older NeoPixel strips you might need to change the third parameter--see the strandtest // example for more information on possible values. Adafruit_NeoPixel pixels = Adafruit_NeoPixel(1, PIN, NEO_GRB + NEO_KHZ800); // https://stackoverflow.com/questions/9072320/split-string-in…